DZ47LE-125 Residual current circuit breaker

1.  Personnel and fire protection

2.  Cable and line protection against overload and short-circuits.

分类:

描述

DZ47LE-125 residual current circuit breaker is suitable for circuits with an alternating current of 50Hz/60Hz, a rated voltage of single-pole two-wire, two poles at 230V, three-pole four-wire and four poles at 400V, and a rated current of up to 125A. When there is a personal electric shock or the leakage current of the power grid exceeds the specified value, the residual current operated circuit breaker can quickly cut off the faulty power supply within an extremely short time to protect the safety of people and electrical equipment. At the same time, it can protect the overload or short circuit of the circuit and the motor, and can also be used for the infrequent conversion of the circuit and the infrequent starting of the motor.
This product complies with the standards of GB/T16917.1 and IEC61009-1.

Function

1.  Personnel and fire protection

2.  Cable and line protection against overload and short-circuits.

 

Selection

1.  I∆n ≤ 30 mA: additional protection in the case of direct contact.

2.  I∆n ≤300 mA: preventative fire protection in the case of ground fault currents.

3.  AC class – Tripping is ensured for sinusoidal, alternating currents, whether they be quickly applied or slowly increase.

Function

1.  Personnel and fire protection

2.  Cable and line protection against overload and short-circuits.

Selection

1.  I∆n ≤ 30 mA: additional protection in the case of direct contact.

2.  I∆n ≤300 mA: preventative fire protection in the case of ground fault currents.

3.  AC class – Tripping is ensured for sinusoidal, alternating currents, whether they be quickly applied or slowly increase.

Release

WordPress Responsive Table

Appearance and Installation Dimensions (mm)

评价

目前还没有评价

成为第一个“DZ47LE-125 Residual current circuit breaker” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注